User's Manual

AR396 User’s Guide
19
 Select the Public IP of NAT from Interface IP address or Manual IP address. If it is manual
IP address, enter the associated IP address.
 Check to enable Firewall feature
 Check to enable IGMP Multicast to avoid the multicast packet flooding to other LAN ports
where do not need this IGMP packet to get better efficiency in Ethernet port.
 Check to enable WAN service
 Enter the Service Name if you want to change it.
 Check to enable MAC Clone feature and enter the associated MAC address.
 Click Next
The WAN Setup Summary page shows all of parameters.
Figure 21: WAN Summary, PPPoA or PPPoE Configuration
Click Save if correct and click Back to restart the configuration again.