User's Manual
AR396 User’s Guide
40
IPSe c
The page provides IPSec VPN configuration to establish a VPN tunnel.
Figure 56: IPSec VPN Configuration
Check the Enable box to enable this IPSec tunnel.
Click Add New Connection to create a IPSec VPN profile. Click Edit button to edit the current
settings, click Remove button to remove the IPSec VPN profile.
Figure 57: IPSec VPN Settings
Global Setting
Enter IPSec Connection Name
Enter the IP address of remote IPSec Gateway
Select Tunnel access from local IP address: subnet or single IP address
Enter the local IP address of VPN tunnel
Enter the local IP subnet mask
Select the Key exchange method: IKE or Manual