User's Manual

AR396 User’s Guide
47
the same as Network Authentication is Open and WEP Encryption is enabled.
 If the Network Authentication is 802.1X, enter the IP address and Port number of Radius
server, Radius Key, enable or disable WEP encryption. If WEP Encryption is enabled,
select the Encryption Strength with 64bits or 128bits, select the current Key Index and
enter the key and four keys when necessary.
Figure 68: Wireless Setting – 802.1x Security
 If the Network Authentication is WPA, enter WPA Group Rekey Interval, the IP address
and Port number of Radius server, Radius Key, WPA Encryption Method (TKIP, AES,
TKIP+AES), enable or disable WEP encryption. If WEP Encryption is enabled, select the
Encryption Strength with 64bits or 128bits, select the current Key Index and enter the key
and four keys when necessary.
Figure 69: Wireless Setting – WPA Security
 If the Network Authentication is WPA-PSK (pre-shared key), enter the WPA Pre-Shared
Key and enter WPA Group Rekey Interval, WPA Encryption Method (TKIP, AES,
TKIP+AES), enable or disable WEP encryption. If WEP Encryption is enabled, select the
Encryption Strength with 64bits or 128bits, select the current Key Index and enter the key
and four keys when necessary.