User's Manual

AR396 User’s Guide
48
Figure 70: Wireless Setting – WPA-PSK Security
 If the Network Authentication is WPA2, select Enable or Disable for WPA2
Pre-authentication, enter value of Network Re-Auth Interval, enter value of WPA Group
Rekey Interval, the IP address and Port number of Radius server, Radius Key, WPA
Encryption Method (TKIP, AES, TKIP+AES), enable or disable WEP encryption. If WEP
Encryption is enabled, select the Encryption Strength with 64bits or 128bits, select the
current Key Index and enter the key and four keys when necessary.
Figure 71: Wireless Setting – WPA2 Security
 If the Network Authentication is WPA2-PSK (pre-shared key), enter the WPA Pre-Shared
Key and enter WPA Group Rekey Interval, WPA Encryption Method (TKIP, AES,
TKIP+AES), enable or disable WEP encryption. If WEP Encryption is enabled, select the
Encryption Strength with 64bits or 128bits, select the current Key Index and enter the key
and four keys when necessary.
Figure 72: Wireless Setting – WPA2-PSK Security
 If the Network Authentication is mixed WPA2/WPA, select Enable or Disable for WPA2
Pre-authentication, enter value of Network Re-Auth Interval, enter value of WPA Group
Rekey Interval, the IP address and Port number of Radius server, Radius Key, WPA
Encryption Method (TKIP, AES, TKIP+AES), enable or disable WEP encryption. If WEP
Encryption is enabled, select the Encryption Strength with 64bits or 128bits, select the