User's Manual

AR396 User’s Guide
59
• FTP
• HTTP
• ICMP (Ping)
• SNMP
• SSH
• TELNET
• TFTP
 Click Save/Apply to save the configuration.
IP Address
Figure 90: Management Configuration – Access Control: IP Address
Click to enable or disable Access Control by IP address.
Click Add to add IP address.
Check Remove and click Remove to remove the specified entry.
Figure 91: Management Configuration – Access Control: Add IP Address
Global Setting:
 Add the IP Address and Subnet Mask which are permitted to access the device and
execute the management service.
 Click Save/Apply to save the settings.