User's Manual

AR396 User’s Guide
63
Click OK to confirm your changes, and then close the Control Panel.
C o nfig uring Wire le ss LAN c a rd
If your PC is connected to the device through wireless link, you need to configure the network
setting of wireless LAN card in stead of LAN card. The steps to configure the network settings
of wireless LAN card are the same procedure described in previous section, Configuring
Ethernet LAN card section.
Wireless card and drivers
You need to install the wireless card and drivers correctly. Please check the information of
installation and security of wireless card provided by the wireless card vendor or notebook
vendor.
Configuring wireless device
The following steps provide a basic guide line to configure the wireless card to establish a
wireless connection to the device.
To configure wireless card to establish a connection to the device:
1. Make sure the wireless access card is installed.
2. Make sure the wireless driver is installed.
3. Scan the available wireless AP (Access Point) and find the SSID of the device
4. Connect to the AP
5. Enter the security code (WPA, WEP or others) if necessary
Then you have a connection to the device through wireless link.