User's Manual

AR396 User’s Guide
67
Appendix C - Specification
A1. Hardware Specifications
 Local Interface
• Four port 10/100BaseT Ethernet Switch (4 * RJ-45 connectors), IEEE 802.3u with
MDI/MDIX auto-detection
• Integrated 802.11b/g WLAN Access Point
 WAN ADSL Line Interface
• Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413 Issue 2
• Line Impedance: 100 Ω
• Connection Loops: One (pair wire)
• Connector: RJ-11
 Indicators
• POWER – Green LED indicates power and operation. Orange LED indicates failure.
• ALARM – Red LED indicates DSL link not connected
.
• LAN 1 ~ 4 – Green LED indicates LAN connection.
• WLAN – Green LED indicates wireless function enabled.
• DSL – Green LED indicates DSL link connected.
• INTERNET – Green LED indicates PPP connection. Red indicates PPP failure or device
can not get an IP address.
 OAM&P
• Local: Telnet and Web management
• Remote: Telnet and Web Management
 Environment
• Operation Temperature: 0°C ~ 40°C
• Operation Humidity: 5% ~ 95%
• Storage Temperature: -20 ~ +85°C
• Storage Humidity: 5%~95%
 Power
• DC Adapter: Input 100~240VAC, 50/60Hz; Output 12VDC 1A
 Certificates
• UL,FCC(TBD)
A2. Software Specifications
 Bridging
 Transparent Bridging and spanning(IEEE 802.1D) with at least 32 MAC addresses
 RFC2684 (RFC 1483) Bridged
 Routing
 IP routing and PPP supported
 PAP and CHAP for user authentication in PPP connection
 RFC2684 (RFC1483) Routed
 MAC Encapsulated Routing (MER)
 DHCP client, server and relay agent
 DNS relay
 Wireless LAN
 Supports 802.1x; WEP; WEP2; WPA; WPA2; TKIP; AES
 Hidden SSID

WMM for advanced Quality of Service
 Firewall
 Support NAT and DMZ
 Stateful Packet Inspection (SPI) with DOS protection - Ping of Death, SYN Flood LAND