User's Manual

FG101 User’s Guide
31
Check Remove and click Remove to remove the specified entry.
Figure 37: Quality of Service Configuration
The screen creates a traffic class rule to classify the upstream traffic, assign queue
priority which defines the precedence and type of service. A rule consists of a class
name and at least one condition below. All of the specified conditions in this
classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to
save and activate the rule. If a non-zero value is selected for IP precedence or a value
other than “Normal” for IP type of service, the corresponding TOS byte in the IP
header of the upstream packet will be overwritten by the selected value.
Global Setting
 Enter the Traffic Class Name
 Select the Rule Order and Rule Status from the list
 Select the Assign Classification Queue from the list
 Select the Assign Differentiated Service Code Point (DSCP) Mark from the list. If
the field is not empty, the corresponding DSCP byte in the IP header of packet
will be overwritten by the selected value.