User's Manual
FG101 User’s Guide
62
Global Setting
Select to Enable Log function or not
Select Log Level from the list
Select Display Level from the list
Select Mode from the list
Click Save/Apply to save the configuration.
TR- 069 C lie nt
This page allows you to access TR-069 ACS (Auto-Configuration Server). The ACS
can provision, configure, and diagnostic the device from remote site.
Figure 68: Management Configuration – Firmware Upgrade
Global Setting
Select to Enable or Disable to send Inform packet to ACS.
Enter the Inform Interval number of seconds. The Inform packet will be sent to
ACS periodically.
Enter the ACS URL to reach ACS
Enter the ACS User Name and Password
Enter the Connection Request User Name and Password
Click Save/Apply to save the configuration