User's Manual
FG101 User’s Guide
82
Appendix D - Specification
A1. Hardware Specifications
LAN Interface
• Four port 10/100BaseT Ethernet Switch (4 * RJ-45 connectors), IEEE 802.3u
with MDI/MDIX auto-detection
• Integrated 802.11b/g WLAN Access Point
WAN fiber Interface
• Compliant with IEEE802.3ah 100Base-BX
• Compliant with ITU-T G.985 class S
• SC Connector
• Compatible with solder and aqueous wash processe
• Class 1 laser product complies with EN 60825-1
• Transmitting Frequency: 1310 um ,
• Receiving Frequency: 1510
Analog Voice Interface
• 2 FXS ports (2 * RJ-11 connectors) for analog phone sets
Indicators
• PWR – Green LED indicates power and operation. Red LED indicates failure.
• WAN – Green LED indicates broadband connection
• Internet – Green LED indicates PPP connection and RED indicates PPP failure
or device in BRIDGE mode.
• TEL1 – Green LED indicates phone connection
• TEL2 – Green LED indicates phone connection
• LAN – Green LED indicates LAN connection
• WLAN – Green LED indicates wireless AP enabled
OAM&P
• Local: Telnet and Web management
• Remote: Telnet Web Management
Environment
• Operation Temperature: 0°C ~ 40°C
• Operation Humidity: 5% ~ 95%
• Storage Temperature: -20 ~ +85°C
• Storage Humidity: 5%~95%
Power
• AC Adapter: Input 100~240VAC, 50/60Hz; Output 12VDC 1.50A
Certificates
• CE, CB (TBD)
A2. Software Specifications
Bridging
Transparent Bridging and spanning(IEEE 802.1D) with at least 32 MAC
addresses
RFC2684 (RFC 1483) Bridged
Bridge filtering with per-port extensions
Routing
IP routing and PPP supported
PAP and CHAP for user authentication in PPP connection
RFC2684 (RFC1483) Routed
MAC Encapsulated Routing (MER)
DHCP client, server and relay agent