User's Manual

EG102 User’s Guide
42
 If the Network Authentication is WPA, enter WPA Group Rekey Interval, the IP
address and Port number of Radius server, Radius Key, WPA Encryption Method
(TKIP, AES, TKIP+AES), enable or disable WEP encryption. If WEP Encryption is
enabled, select the Encryption Strength with 64bits or 128bits, select the current
Key Index and enter the key and four keys when necessary.
 If the Network Authentication is WPA-PSK (pre-shared key), enter the WPA
Pre-Shared Key and enter WPA Group Rekey Interval, WPA Encryption Method
(TKIP, AES, TKIP+AES), enable or disable WEP encryption. If WEP Encryption is
enabled, select the Encryption Strength with 64bits or 128bits, select the current
Key Index and enter the key and four keys when necessary.
 If the Network Authentication is WPA2, select Enable or Disable for WPA2
Pre-authentication, enter value of Network Re-Auth Interval, enter value of WPA
Group Rekey Interval, the IP address and Port number of Radius server, Radius
Key, WPA Encryption Method (TKIP, AES, TKIP+AES), enable or disable WEP
encryption. If WEP Encryption is enabled, select the Encryption Strength with
64bits or 128bits, select the current Key Index and enter the key and four keys
when necessary.