User's Manual

EG102 User’s Guide
46
Adva nc e d
This page allows you to configure advanced parameters for wireless communication.
Figure 52: Wireless Setting – Advanced
Global Setting
 Enable AP Isolation if you do not want AP to be able to communicate with each
other.
 Set the Wireless Communication Band. If you do not know it, please it as default.
 Select the channel from the list
 Set the Wireless Communication Rate, AUTO means to use the highest rate if
possible)
 Set the Rate for Multicast Packets, AUTO means to use the highest if possible.
 Set the Basic Rate
 Set the Fragmentation Threshold values from 256 to 2364 bytes. If the value is
too small, it may cause a result in poor performance.
 Set the RTS (Ready to Send) Threshold
 Set DTIM Interval. DTIM stands for Delivery Traffic Indication Message. This is a
beacon and is a countdown informing wireless clients of the next window for
listening to broadcast and multicast messages. It is a wake-up interval for clients
in power-saving mode.
 Set Beacon Interval. The interval in milliseconds between beacon transmissions.