User's Manual

EG102 User’s Guide
54
Figure 60: Voice Configuration – Operational Setup 2
Global Setting:
 Place a check in the list of call features which is supported in Line 1 and Line 2.
 Enter the value of feature timers including Redialing Duration, Retrial Interval,
OnHook Delay, PSTN Session Progress Timeout, Call Waiting Ring Timeout.
 Enter the value of Signal Timers including Call Waiting Period, Reorder Delay,
Ring Timeout, No Answer Timeout, Min. Hook Flash Time, Max. Hook Flash
Time.
 Place a check in the list of Operational Flags including Enable Call Forwarding
on Server, Enable Call Return on Server, Allow Incoming Call to Phone 1, Allow
Incoming Call to Phone 2, CLIR Method (Anonymous Form or Use Privacy
Header), Phone 1 Use (SIP1 or SIP2), Phone 2 Use (SIP1 or SIP2)
 Define the Service Activation Code for each call service
 Configure your own Dial Plan.
 Click Save to save the configuration
Those parameters are related to the VoIP service provided by Voice Service Provider.
Please leave it as default or consult technician in advance to understand and
configure it.