User's Manual

EG102 User’s Guide
64
Global Setting:
 Specify the method by which you wish to access the router locally or remotely by
selecting it. The following are the methods available for local and remote access:
z FTP
z HTTP
z ICMP (Ping)
z SSH
z TELNET
z TFTP
 Click Save/Apply to save the configuration.
IP Address
Figure 70: Management Configuration – Access Control: IP Address
Click to enable or disable Access Control by IP address.
Click Add to add IP address.
Check Remove and click Remove to remove the specified entry.
Figure 71: Management Configuration – Access Control: Add IP Address
Global Setting:
 Add the IP Address which is permitted to access the device and execute the
management service.
 Click Save/Apply to save the settings.
Password
There are three levels of access accounts: admin, support, and user. The user name
“admin” has unrestricted access to change and view configuration of the device. The
user name “support” is used to allow an ISP technician to access the device for
maintenance and to run diagnostics. The user name “user” can access the device,