User's Manual

EG102 User’s Guide
82
Appendix D - Specification
A1. Hardware Specifications
 LAN Interface
• Four port 10/100BaseT Ethernet Switch (4 * RJ-45 connectors), IEEE 802.3u
with MDI/MDIX auto-detection
• Integrated 802.11b/g WLAN Access Point
 WAN Ethernet Line Interface
• 10/100BaseT Ethernet port
 Analog Voice Interface
• 2 FXS ports (2 * RJ-11 connectors) for analog phone sets
 Indicators
• PWR – Green LED indicates power and operation. Red LED indicates failure.
• WAN – Green LED indicates broadband connection
• Internet – Green LED indicates PPP connection and RED indicates PPP failure
or device in BRIDGE mode.
• TEL1 – Green LED indicates phone connection
• TEL2 – Green LED indicates phone connection
• LAN – Green LED indicates LAN connection
• WLAN – Green LED indicates wireless AP enabled
 OAM&P
• Local: Telnet and Web management
• Remote: Telnet Web Management
 Environment
• Operation Temperature: 0°C ~ 45°C
• Operation Humidity: 5% ~ 95%
• Storage Temperature: -20 ~ +85°C
• Storage Humidity: 5%~95%
 Power
• AC Adapter: Input 110/220VAC, 50/60Hz; Output 12VDC 1.50A
 Certificates
• CE, CB (TBD)
A2. Software Specifications
 Bridging
 Transparent Bridging and spanning(IEEE 802.1D) with at least 32 MAC
addresses
 RFC2684 (RFC 1483) Bridged
 Bridge filtering with per-port extensions
 Routing
 IP routing and PPP supported
 PAP and CHAP for user authentication in PPP connection
 RFC2684 (RFC1483) Routed
 DHCP client, server and relay agent
 Wireless LAN
 Supports 802.1x; WEP; WEP2; WPA; WPA2; TKIP; AES; 802.11i
 Hidden SSID
 WMM for advanced Quality of Service
 Multiple SSIDs
 Firewall