User's Manual

Enable Management from WAN port. The remote management can be
enabled or disabled by clicking the checkbox. When enabled the user from the
Internet can configure the gateway via the web.
Web Port. The well-known port of the web is 80; if you have your own web site
on your LAN for Internet access, please assign another number that is unique
to your virtual server settings.
Allow Management From PC. Check the box you can restrict management
access from the LAN, only the PC with the MAC address you specified here
can manage the gateway. If you keyed in with wrong MAC and saved
accidentally, your PC might lose access right to the gateway. Please press the
reset button (on the rear side of the gateway) for 5 seconds to restore the
gateway to factory default value.
Send System Log To this PC. The gateway will send the system logs to the
PC with the IP address specified here.