User's Manual

3.3.2 Management >> Factory Reset
Click the button to set all configurations to factory default.
The default values are:
User Name: admin
Password: admin
Internet Port: DHCP.
Local port address: 192.168.1.1
Subnet mask: 255.255.255.0
DHCP server: enable
DHCP start address: 192.168.1.2
Number of DHCP clients: 128
Wireless: Enabled
SSID: XAVi
Channel: 10
Operation Mode: 802.11b/g mixed
WEP security: No
Remote Management: Enabled
UPnP: Enabled
3.3.3 Management >> Firmware Upgrade
Firmware can be upgraded by clicking the Upgrade button after browsing for
the firmware, which you can download from the XAVi website. Do not upgrade
your firmware unless you are experiencing problems with the gateway. After a
successful upgrade, the modem will reboot by itself, you current page will be
brought back to the first page of the configuration.