User's Manual

and Ringer Equivalence Number (REN) for this equipment. You must, upon
request, provide this information to your telephone company.
This equipment has been tested and found to comply with the limits for a Class
A digital devices, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communication.
Operation of this equipment in residential area is likely to cause harmful
interference in which case the will be required to correct the interference at this
own expense. The user should not modify or change this equipment without
written approval from company name. Modification could void authority to use
this equipment.
For the safety reason, people should not work in a situation which RF
exposure limits be exceeded. To prevent the situation happening, people who
work with the antenna should be aware of the following rules:
1. Install the antenna in a location where a distance of 20cm from the
antenna may be maintained.
2. While installing the antenna in the location, please do not turn on the
power of wireless card.
3. While the device is working, please do not contact the antenna.
APPENDIX E DDNS UPDATE STATUS MESSAGES
(1) When starting the DDNS service.
Updating dynamic DNS server, please wait.
(2) When DHCP Client or PPPOE cannot get IP on the Internet Port.
Could not resolve IP address for the device.
(3) When DDNS update successful.
Update dynamic DNS server successful IP: <Your Internet IP address> (eg.
211.21.190.99)