User's Manual

 Do Not Remove Covers – Do not attempt to service this product yourself,
as opening or removing covers may expose you to dangerous voltage or
hazards.
 Unplug this Product From Wall Outlet Carefully, as the Power Adaptor
May Be Hot.
 Refer Servicing to Qualified Service Personnel Under the Conditions
Listed Below.
>When the power supply cord or plug is damaged.
>If liquid has been spilled or objects have fallen into the product.
>If the product has been exposed to rain or water.
>If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions.
>If the product has been dropped or the cabinet has been damaged.
>When the product exhibits a distinct change in performance, such as the
inability to perform bask functions – this indicates a need for service.
 Require Safety Check – Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks
recommended by service point to determine that the products is in safe
operating condition.
1.4 Connecting The XAVi Wireless Gateway
To Be Determined.
Reset Button. Press the reset button for 5 seconds; the gateway will be
restored to default value. All your old configurations will be gone, please
backup your configuration.
CHAPTER 2 CONFIGURING THE PCs
Overview
The instructions in this chapter will help you configure each of your computers
to be able to communicate with the Router.
To do this, you need to configure your PC’s network settings to obtain an
address automatically, so your PC can function as a DHCP client. Computers
use IP address to communicate with the Router and each other across a
network, such as the Internet.