Installation Manual

X16 Installation Guide - 12 -
System
Configuration
System Configuration The system uses advanced digital interface technology. One cable pair supports up to four digital telephone endpoints. Each digital telephone endpoint has its own extension number, and can be called from any other extension in the system.
- 53 -
Functions
CO Line Cadence and Status Table Speaker Unlit: Speaker or Intercom Link Idle
Fast: Receiving incoming call Lit: Talking with the Digital Telephone Endpoint Slow: In headset mode
Enter/VM Unlit: No New messages
Fast: New Message in VM Lit: No answer forward active – unanswered calls will be forwarded to VM Slow: New Telephone Company Line Message Waiting
Mute Unlit: Inactive – phone is not muted
Lit: Active – phone is muted
All Page On Flexible Button
Unlit: Inactive – Not currently paging Lit (rapid flash): Making or receiving a page
DND On Flexible Button
Unlit: Inactive – DND function is off Lit (solid): Active – DND function is active
Record On Flexible Button
Unlit: Inactive – Not recording call Lit (rapid flash): Active – Recording call
Headset On Flexible Button
Unlit: Headset function is off Lit: Headset function is on
DSS/BLF On Flexible Button
Unlit: The extension programmed on the button is idle Lit: The extension programmed on the button is busy Slow: The extension programmed on the button is in DND
Ringing Cadence CO Ring Synchronized with CO Ringing Intercom Ringing 0.25 sec on, 0.25 sec off, 0.25 sec on, 1.25 sec off repeating. Transfer/Recall 1 sec on, 1 sec off, repeating Hold Reminder 1100Hz, 0.05 sec on/off, 4 beeps Privacy Release 1100Hz, 0.2 sec on/off, 1 beep Privacy Recover 1100Hz, 0.2 sec on/off, 2 beep Call Waiting Beep 500Hz, 0.2 sec on/off, 2 beeps Single/All Page 600Hz, 1.0 sec on, 1 beep Confirmation Beep 1100Hz, 0.5 sec on, 1 beep Warning Beep 1100Hz, 0.05 sec on/off, 3 beeps Cable Specifications Category AWG Length Impedance CAT5e 24 600 feet 20 Ohms