Installation Manual

X16 Installation Guide - 50 -
Programming Guide
System Programming Default Password “####”
Feature Parameter Sub Parameter Change Password
####
Date & Time Year
Month/Date Time 00:00 format
Recall Time 30-120 seconds Tone/Pulse Tone, pulse Flash Time 80-800 milliseconds Music Source Internal/External CO MSGW On/Off Clear CO MSGW
Yes?/No?
Area Codes Home Area code
Local Area C1 Local Area C2 Local Area C3 Local Area C4 Local Area C5
Mail System Clear All VMSG Yes?/No?
Auto Attend Ring On-AA Ring Only
Off-AllEXT Ring
Attendant Extension 301 Ext AA Answer Delay 06~240 seconds Message Length Unlimited
Greeting 1 Minutes
Day Time 09:00 A Night Time 06:00 P Day Time OGM (Outgoing Msg) Night Time OGM (Outgoing Msg ) AUX OGM (Outgoing Msg)
Reset KSU Yes?/No?
- 15 -
Installation
Step 3 – Telephone Endpoint Connection Connect telephone endpoints to the system using one RJ11 port for up to 4 different endpoints, with a maximum of 600 feet per port. Once connected each telephone endpoint will register with the voice server when it is powered up. At default, the extensions begin with number 301. The remaining extension numbers must be entered. See step 5
.
Correct Installation process It is important to connect a telephone to every jack that is connected to the system. Extensions connected to a cable with “Bridge Taps”, may experience distortion. If locating a bridge tap is not practical, a quick resolution is to use a different cable pair such as the Yellow/Black or White/Orange.
Extensions
13
~
16
9
~
1
2
5~8
1
~
4