Installation Manual

X16 Installation Guide - 22 -
Feature Description
Call Pick up There are two types of call pick up, intercom and CO Line. In both cases, the telephone that has the call picked up from must be ringing.
Intercom – When one extension calls another extension, but the called party is not there, the calling party presses the “*” key to activate ringing. If the extension user of the called party hears their extension ringing, they may press the * key on any other telephone endpoint and pick up the actively ringing call. CO Line – Transferred Telephone Company Lines can be picked up by another extension by press the # key on their telephone endpoint. - When the * key is pressed the first ringing extension will be
picked up.
- When the # key is pressed the first transferred CO Line will be
picked up.
Call Timer When making or receiving a call the backlit display shows the time that the call has been connected in four digit format (00:00). Caller ID and Call Waiting Caller ID (Type 1 & Type 2) The telephone company offers two types of caller ID; type 1 and type 2. Type 1 caller ID presents the caller’s name, number (when available) and the date and time of each call. Type 2 incorporates all of the features of type 1 plus it adds call waiting, caller ID. The system will automatically begin working with caller ID when the user subscribes for the telephone companies Caller ID service, and it will set the system’s time and date. CO Line Busy/Idle Status (LED) Each Preprogrammed CO Line button has an associated dual color Light Emitting Diode (LED), which lights when the line is in use and remains unlit when the line is idle. When the user presses a Line button the LED will illuminate green (I-use) on their telephone and blue (busy) on all telephones. The Line button will light blue (Busy) when a device which is connected to a telephone company line, in front of the system, is off hook. Once off hook, only one digital telephone endpoint may access the line by presses the busy line button, all others will receive busy tone.
- 43 -
Phone Setup
Feature Button Programming Step 1 – Press the program button Step 2 – Select phone setup Step 3 – Press the select (center) navigation key Step 4 – Press the down navigation key and select “Feature Key” Step 5 – Press the center navigation button to begin Step 6 – Press the up or down navigation key to select the feature
button to be programmed or press the feature key to be programmed.
The display will show the selected FTR button. The display below shows FTR#01, FTR button 1, was pressed. Step 7 – Press the Program button to exit programming and not modify the current button programming or press the center button to change the current setting. Step 8 – Using the up or down navigation key, select between DSS/BLF, Speed Key, or Feature. Step 9 – Press the select button to display the current programmed function. Step 10 – Enter the appropriate extension, speed dial number or use the up or down navigation keys and select the desired feature. Step 11 – Press the select button to confirm the selection.
AUTO MUTE
Select FTR Key
AUTO MUTE
FTR#01:DSS/BLF =301
AUTO MUTE
FTR#01 =DSS/BLF Key