Installation Manual

X16 Installation Guide

- 34 -

Feature Description

Notes:

- 31 -

Feature Description

Ring Alert (Muted Ringing)

When an extension is busy, and a second call rings into the system, if the

extension is programmed to ring the extension will receive a ring alert, indicating

that there is a second call. Extensions that are busy on either a CO Line or

Extension call will receive a special “Warning Beep” for 5 seconds, or until the

line is answered by another extension.

Ringing (Audible and Visual)

When an extension is ringing, there will be an audible sound, which can be

adjusted from very low to very loud and a visual indication, flashing LED, to

indicate that the extension is ringing.

Ringer Volume Control

Using the digital telephone endpoint’s volume up and down keys, an extension

user may adjust the ringing volume of their telephone, while the call is ringing.

Room Monitor

Each telephone endpoint can be used as a “Room Monitor” device. If the “Auto

Mute” feature is enabled at the called location, the Mute key must be disabled

before monitoring can begin.

Setting Time and Date (Automatic)

The system time and date can be set in system programming or by using Caller

ID. Caller ID, if subscribed for, will set the system’s time and date and

automatically reset the clock for daylight savings.

Speakerphone (Digital Telephone Endpoint) with LED

Each digital telephone endpoint is equipped as a speakerphone. When the

speakerphone is active, the LED will be illuminated.

Speed Dial Bins

The station has 12 speed dial bins; each can take up to 24 digits to be dialed.

Set Relocation

Extension parameters such as voicemail will remain for up to 120 seconds when

an extension is unplugged or being relocated. To relocate an extension simply

unplug it and plug it into another extension port.

Note:

An “Endpoint Device” may be needed when relocating an extension.