User's Manual

User Manual XC Tracer Maxx Rev 01 23.2.2020
as soon as you switch on XC Tracer, and the logging will only be stopped when you switch
off the device.
pilotName=Koni Schafroth
Enter your name here. Please don’t use accidentally use any tabs as they will invalidate the
IGC file. Spaces are fine.
passengerName=
You can enter the name of a tandem passenger here if you like.
gliderType=Gin Explorer
Enter your glider make and model here.
gliderId=14049
Enter the immatriculation number (if you have one) of your glider here.
# screen version options
Simple
Standard
Standard & Buddy
Standard & Thermal
Standard & Thermal & Buddy
Standard & Thermal & Airspace
Standard & Thermal & Buddy & Airspace
# screen version
screenVersion=Standard & Thermal & Buddy
Here you can choose which screen combination you want to have. The screens are
explained below. Only the line screenVersion=Standard & Thermal & Buddy is interpreted by
the microcontroller, this line is used to make the settings.
# Automatic switching between standard & thermal screen
automaticSwitchScreen=yes
Here you can set whether or not you want to automatically switch from the standard screen
to the thermal screen and back. This can be useful if you want to use the thermal assistant,
but prefer not to release the brakes and press the red button to switch the screen.
# create your own vario tone settings below
beepOnlyWhenFlying=yes
When this is set XC Tracer Mini III GPS will be silent before takeoff. This is very helpful when
you have configured some kind of a thermal sniffer. With beepOnlyWhenFlying=yes the
variometer will be silent until XC Tracer Mini III GPS detects a horizontal velocity of 4m/s or
more during 1-2 seconds. With beepOnlyWhenFlying=no the variometer will beep not only in
flight, but also when you walk or move.