USB Proximity Desktop Reader and Programmer PG1000 User Guide
PG1000 User Manual Table of Contents Table of Contents .......................................................................................................................................................................... 2 Revision History ............................................................................................................................................................................. 2 Document Control Number: .................................................................
PG1000 User Manual XceedID PG1000 Desktop Proximity Programmer and Reader This document provides the basics needed to get up and running with the XceedID Desktop Proximity Programmer and Credential Reader. Items needed (Included in the box): 1. 2. 3. 4. XceedID Desktop Proximity Programmer and Credential Reader Host A to Device mini‐B USB Cable Software disk containing the User interface This guide Computer Requirements Minimum: 1.
PG1000 User Manual Installation Procedure The order of installation does not matter, though installing the Software first is recommended. Installing the Software: 1. Place the installation CD in the CD‐ROM drive. 2. The disk should auto‐play. *If the disc does not auto‐play: 1. Navigate to the CD‐ROM drive through Windows Explorer. 2. Double‐click Setup.exe. 3. Follow the on‐screen instructions to complete the software installation. *You may be required to download the .Net Framework 3.
PG1000 User Manual Operation Default: After the Desktop Reader/Programmer has been plugged into the host computer, it will function as a desktop reader. In this mode the device behaves much like a keyboard. If a user presents a credential before setting the decoding options, the device will print the binary information of the card into the active window or data field if it receives text. The number of characters that appear represent the card format (e.g.
PG1000 User Manual Programmer Mode: To get the device into Programmer Mode, the user must click the programmer tab at the top of the application window. This will change the window to allow the user to program a card or multiple cards. The user must then specify all of the following options then click the program button. Card Format Facility Code City Code (only in select formats) Badge ID Number to Program (1 is default) While in programmer mode, the LED will be a solid green.
PG1000 User Manual Troubleshooting Problem Solution Solution Device is not recognized by my computer Unplug device from PC and plug it back in Unplug device from USB port and plug into a different USB port Verify that the device is in programmer mode the LED indicator should be AMBER. Reset the device by unplugging the USB cable and plugging it back in, the SW Interface will need to closed and restarted as well.
Contact Information XceedID Corporation 500 Golden Ridge Road Building 1, Suite 160 Golden, CO 80401 Phone: (888) 943‐1356 Fax: (888) 866‐954‐1779 http://www.xceedid.com/ ©2010, XceedID Corporation. All rights reserved. Revision 2.2/2010.