User's Manual

PG1000 User Manual

PG1000USERGUIDE Page6

ProgrammerMode:
 TogetthedeviceintoProgrammerMode,theusermustclicktheprogrammertabatthetopoftheapplication
window.Thiswillchangethewindowtoallowtheusertoprogramacardormultiplecards.
Theusermustthenspecifyallofthefollowingoptionsthenclickthe
programbutton.
 CardFormat
 FacilityCode
 CityCode(onlyinselectformats)
 BadgeID
 NumbertoProgram(1isdefault)
 Whileinprog rammermode,theLEDwillbeasolidgreen.Toprogramthecard,simplypresentthecardtothe
deviceafterclickingthe
Programbutton.Asuccessfulcardprogra mwillbeindicatedbytheLEDflashinggreen
onceandtwobeeps.Ifmorecardsaretobeprogrammed,theLEDwillrever tbacktosolidgreenandthebadge
IDwillincrementplusone.Iftherewasonlyonecardtoprogramorthe
finalcardwasprogrammed,theLED
willflashgreenandtherewillbe7shortbeeps.
 *ThedevicewillonlyprogramXceedIDProximitycredentials


 