Manualshelf

Instructions / Assembly

ManualsBrandsXcel ManualsFencing5 ft. H x 6.5 ft. W - Pre-Galvanized Steel, Pressed Top/Picket Bottom Style Fence Panel Kit, Garden Fence
123
Installation Instructions (Panels ONLY)
1. Locate Top Rail and Bottom Rail
2. Place Bottom Rail on the Floor, facing Up
3. Insert individual Pickets into the Rail Holes
4. Make sure holes are facing to the Right and Left
5. Place Top Rail on opposite side of Pickets
6. Make sure Grommets face the Pickets
Installation Instructions (At Job Site)
1. Draw and measure layout of where the fence will be installed
2. Mark locations and distance between posts to 76” apart
3. Set posts (dig hole 18-24” deep or use Flange for concrete)
4. Use and attach brackets to posts
5. Install Rails to brackets (rails will follow your terrain)
6. Insert pickets through the bottom rail, then pull up to attach the top rail.
7. You are done!
THANK YOU FOR PURCHASING OUR FENCE PANELS!
Attach brackets to
post
Drill to concrete to
secure post
Attach Top and Bottom
Rails on brackets
Insert pickets through
the Top & Bottom rail
first
You are done
You are done
Insert pickets through
the top & bottom rail
first