Installation Guide

CHAIN LINK ROLLING GATE KIT

INSTALLATION GUIDE

Item Description

With our Chain Link Rolling Gate Kit, you can add security to any driveway. Our Kit comes with all the

components needed to properly create a Rolling Gate for your Chain Link Fence. Follow these steps and you

can be on your way to properly installing a Rolling Gate.

Features

 All parts are Galvanized Pressed Steel

 Nuts & Bolts included

 On-site assembly

 Zero Maintenance

 Easily Transported/Compact Box

Please read these instructions carefully before installing your XCEL Fence. If you have any questions or

issues installing the fence, please contact us at 866-392-0808 for assistance.

Tools You Will Need

 Socket Set, Pliers, Level

 Hammer, All parts from this Kit

ATTENTION:

PLEASE MAKE SURE ALL CONTENTS ARE IN THE FENCE KIT.

DO NOT ATTEMPT TO ASSEMBLE THE FENCE IF PARTS ARE MISSING OR DAMAGED.

Please do not return the product to the store, for assistance or replacement parts call:

866-392-0808

PAGE 1
CHAIN LINK ROLLING GATE KIT INSTALLATION GUIDE Item Description With our Chain Link Rolling Gate Kit, you can add security to any driveway. Our Kit comes with all the components needed to properly create a Rolling Gate for your Chain Link Fence. Follow these steps and you can be on your way to properly installing a Rolling Gate.
PAGE 2
Product Overview Key Notes    Measuring for Gates o Make sure that you get more than one measurement. Following a level plane, you will want to measure both at the top and bottom of the gate o Make sure your measure tape is straight and avoid sloping o Keep your dimensions accurate to 1/8” buffer Rolling Gates.
PAGE 3
assembly has an axle trim bolt that allows you to control the direction of the gate as it rolls through the opening.