Manualshelf

User Manual

ManualsBrandsXcellon ManualsComputersUSB 3.1 Gen 2 Hard Drive Dock
12345678910
5
Plugging In and Setting Up
1 Use the included power adapter to connect the dock to an AC power source. Make sure the
dock is turned o by verifying that the power LED is not glowing.
2 Use one of the included USB cables to connect the dock to the corresponding port on your
computer.
3 Align the SATA contacts on your disk drive and the dock, and fully insert the drive into the
dock.
4 Press the power button to turn on the dock. The power LED will glow blue during normal
operation, purple when a drive is active, and red if a drive is damaged.