PB-1200AC 12,000 mAh POWER BANK Portable Power Bank with AC/USB Outlets User Manual
Thank you for choosing Xcellon. The Xcellon PB-1200AC is a versatile and portable charger that offers a wide variety of power and charging options when you’re on the go. The Power Bank features USB and AC outputs and puts 12,000 mAh of power in your hands whenever you need it. The USB output boasts 5 V and 2.4 A of power for quickly recharging smartphones, iPads, tablets, GoPro chargers, and other USB devices.
Precautions Do not use this unit around water or any flammable gases or liquids. Keep fingers clear of contact with the prongs of the AC plug and AC outlet and use caution when inserting or removing the AC plug from an AC outlet. If the prongs of the AC plug are bent, they can become a shock hazard. Some chargers for small NiCd batteries can be damaged if connected to the Power Bank. Do not use the Power Bank with devices that request a sine wave power source.
Overview 1 Top 1 AC charging port Side 2 3 4 5 6 7 USB charging port USB indicator light Charge indicator lights Check/On button AC switch AC indicator light Rear 8 2 AC adapter input 4 6 Also Included 9 10 11 12 13 9 4 AC adapter AC cable Universal AC plug adapter Carry pouch User manual 10 3 5 7 2 8 11 12 13
Charging the Power Bank 1. Use the included AC plug to connect the AC adapter to an outlet. Insert the plug of the adapter into the input port of the Power Bank. 2. The indicator lights will blink to signify that the unit is charging. Four constant lights indicate the unit is fully charged. 3. Check the battery capacity of the Power Bank by pressing the Check button for 2 seconds. The lights will indicate the level of charge in the Power Bank. Each light signifies 25% capacity.
Charging a Device Using the USB Output The USB output port is capable of charging smartphones, iPads, tablets, GoPro chargers, and other USB-powered devices. To charge a device using the USB output, follow these steps: 1. Plug the device into the USB output on the Power Bank. 2. Press and hold the On/Off button for 2 seconds. The indicator lights will illuminate to show the remaining charge in the Power Bank, and the blue LED in the USB output will glow to indicate that the device is charging.
Charging a Device Using the AC Output The AC output is capable of charging devices such as laptop computers and camera or camcorder batteries, and it can power devices such as small desk fans, desk lamps with 60 W bulbs, routers, printers, DVRs, and computer displays. Important: Only devices that require less than 65 watts of power can be operated. To charge or power a device using the AC output, follow these steps: 1. Plug the device into the Power Bank’s AC Output. 2.
Using the Universal Plug Adapter Important: The Universal AC Plug Adapter is not a power converter and should not be used in that capacity. 8 1. Plug your device into the Universal Plug Adapter. 2. Plug the adapter into the Power Bank’s AC output. 3. Proceed with the instructions under Charging a Device using the AC Output on page 7.
Troubleshooting Problem Solution The Power Bank won’t charge. • Make sure that the Power Bank is securely connected to the wall outlet. • Make sure you have properly connected the AC plug and power adapter to the Power Bank. • Make sure the device is securely connected to the USB output. • Press the On/Off button to make sure that the battery has enough capacity remaining to charge the device. • The battery capacity of the Power Bank may be too low. Recharge the Power Bank.
Specifications Dimensions (H × W × D) 1” × 5.1” × 5.1” (2.6 × 13 × 13 cm) Weight 0.95 lb. (0.4 kg) Capacity 12,000 mAh Battery Type Li-ion Input 20 V DC/2 A (Max.) Wave Form Modified sine wave Output Ports USB, AC USB Output 5 V DC/2.4 A (max.
One-Year Limited Warranty This Xcellon product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1
