Instructions / Assembly

1
750 W Lake Cook Rd, Suite 480 | Buffalo Grove, IL 60089 | Ph: 847.947.0029
www.BuyXcluder.com
 Hacksaw
 Wrench or socket driver
 Eye protection and work gloves
Xcluder® Roll-up Door Seal Installation
Use for Part #s: 562688
Thank you for your purchase of Xcluder® Roll-up Door Seals.
1. Measure and record the width of the roll-up door opening.
2. Cut the Xcluder Door “T” retainer(s) such that they are 1” shorter
than the width measured in step 1.
NOTE: “T” brackets are shipped in 8’ lengths. For doors wider
than 8’, multiple brackets will be required. When using multiple
brackets, cut the brackets such that they are equal in length.
3. Cut the Xcluder Roll-up Door Seal such that it is 4” - 5” longer
than the door opening measured in step 1.
4. Remove the boom “L” brackets from the roll up door.
5. Center the Xcluder “T” retainer(s) on the removed “L” bracket
with the “T” bracket ange snugly against the boom of the “L”
and clamp rmly in place.
6. Using the “L” bracket screw holes as a template, drill mounng
holes through the Xcluder “T” retainer(s).
Tools Required:
 Electric drill and bits
 Screwdriver
 Sharp shears
 Clamps
We recommend two people for this installaon.
Quesons?
Call Installation Support
[phone]
Free
Xcluder® Roll-up Door Seal
“T” Retainer
Version—BG 0520