Other Content

ManualsBrandsXD Series by KMC Wheels ManualsAutomotiveXD Series by KMC Wheels XD775 Rockstar Matte Black Wheel (20x8.5"/5x127, 139.7mm, +10mm offset)

Thank you for your purchase. Wheel Pros is a leading aftermarket wheel manufacturer and distributor committed to product quality and customer

satisfaction. Our state-of-the-art engineering, design and quality control ensure high quality wheels for your vehicle.

Please keep this documentation with the vehicle owner’s manual and, when the vehicle is sold, transfer it to the new owner.

Wheels require regular care to maintain their factory appearance.

Clean them regularly. Please note that warranty claims on ﬁnish will

be voided if improper maintenance or improper cleaning agents are

used.

Typical road dirt traps moisture that, over a period of time, can cause

corrosion. Brake dust, created by braking friction, is corrosive and can

cause pitting of the wheel’s ﬁnish. Most household cleaning agents

are too harsh and must be avoided. Mild dish soap and water is all

you need to properly clean your wheels`.

Care for the ﬁnish of your wheels the way you would care for the

ﬁnish of your car. Do not use abrasive materials to clean wheels as

they can damage the ﬁnish. Use caution when cleaning tires with a

bristle brush and never use scouring pads. Use caution in automatic

car washes because steam cleaners and strong chemicals that are

sometimes used can cause permanent staining or corrosion.

Never clean wheels when they are hot. Always allow wheels time to

cool before cleaning with soap and water. Never spray cold water on

extremely hot wheels.

Chrome-plated aluminum: Clean a chrome ﬁnish using mild dish

soap and water; dry with a soft cloth. After cleaning, apply a coat of

soft, non-abrasive cream wax or wheel seal to prevent surface

corrosion.

Clear coated: Clean a clear-coated ﬁnish using mild dish soap and

water; dry with a soft cloth.

Teﬂon coated: Clean a Teﬂon-coated ﬁnish using mild dish soap and

water; dry with a soft cloth.

Painted and clear-coated: Clean a clear-coated ﬁnish using mild

dish soap and water; dry with a soft cloth.

Machined and clear-coated: Clean a clear-coated ﬁnish using mild

dish soap and water; dry with a soft cloth.

PVD coated: Clean a PVD ﬁnish using mild dish soap and water; dry

with a soft cloth.

Polished aluminum: Clean a polished aluminum ﬁnish using mild

dish soap and water; dry with a soft cloth. The appearance of

polished wheels (that are not clear coated) will diminish over time

unless they receive additional care and maintenance. After cleaning,

apply a coat of soft, non-abrasive cream wax or wheel seal. A

specially formulated custom wheel polish and wheel seal is

recommended to return shine to oxidized wheels. The ﬁnish on

polished aluminum wheels is not covered under any warranty.

Chrome-plated steel: Clean a chrome ﬁnish using mild dish soap

and water; dry with a soft cloth. After cleaning, apply a coat of soft,

non-abrasive cream wax or wheel seal to prevent surface corrosion.

Surface corrosion and rust can be prevented with proper care and is

not covered under any warranty.

If you hit a hard object (e.g. curb, pothole) or have an accident,

always have your wheels inspected by a Wheel Pros retailer. If any

damage is found, replace the wheel immediately.

WHEEL CARE

CONSUMER INFORMATION

Summary of content (1 pages)

PAGE 1
CONSUMER INFORMATION Thank you for your purchase. Wheel Pros is a leading aftermarket wheel manufacturer and distributor committed to product quality and customer satisfaction. Our state-of-the-art engineering, design and quality control ensure high quality wheels for your vehicle. Please keep this documentation with the vehicle owner’s manual and, when the vehicle is sold, transfer it to the new owner. WHEEL CARE Wheels require regular care to maintain their factory appearance. Clean them regularly.