User's Manual

10. Add a white rubber gasket to the top of the cartridge. Orient the gasket to the cartridge using the

angled corner. Attach to the pins first and then to the T-hooks (Fig. 3.3).

Fig. 3.3. Cover the cartridge with the white rubber gasket by orienting it correctly (angled corner on the

gasket to angled corner on cartridge), then attach first the pins then pull gently to attach T-hooks.

Before turning on the instrument please make sure that the main power switch is in the “І” position. The main

switch is located at the back of the instrument. Start the instrument by pushing the Start/Stop button at the

front. The instrument will start initializing and will shift to the “Welcome screen”.

11. Push “Open” on the instrument touch screen to eject the drawer (Fig. 3.4).

Fig. 3.4. The Xdrop™ instrument “Welcome” screen, press “open” to eject the drawer.

First insert

pins

Then insert

T-hooks