User's Manual

SECTION 2: Connecting the Tablet
You can use the tablet with a USB wired connection or over wireless. Note that you should
connect the tablet before trying to install the driver. If you bought the bundle, you should also
connect the Xencelabs Quick Keys before installing the driver.
Connecting the Tablet (and Quick Keys) with a USB Cable
To use with a USB connection or to charge the tablet, connect the provided USB cable to the
tablet and to a USB-A port on a computer (Figure 1). You can connect it to a USB hub, but it
must be a powered hub.
When you connect the tablet by USB and the computer is powered on, the tablet will turn on
automatically.
If you bought the Bundle, please connect the Xencelabs Quick Keys via USB cable in the same
way as the tablet.
Figure 1