Datasheet

User Guide 19
10. Push the tray all the way back into the printer until it latches.
11. If you changed the type of paper in the tray, use the control panel
to specify the paper type:
a. Press the Menu keys (labeled 1 or 5) to scroll to the Tray
Menu.
b. Press the Item keys (labeled 2 or 6) to scroll to Tray 1 Type,
Tray 2 Type, or Tray 3 Type.
c. Press the Value keys (labeled 3 or 7) to scroll to the correct
paper type (plain, preprinted, letterhead, etc.).
d. Press the Enter key (labeled 4).
e. Press the On Line key (labeled 0) to exit the menus.
12. If you are using the Custom Paper Tray:
a. Specify the type of paper in the Custom Paper Tray. In the
Tray Menu, set the Custom Tray Type menu item to the
media type and set the Custom Size menu item to the
standard size to be used by PCL or PostScript to format the
output image on the page. (In most cases, this will be the next
larger standard paper size from the custom size being used.)
b. In your application, format the page (including setting the
margins) to ensure that the image is properly positioned on
the paper based on the standard size (that you defined in the
Tray menu).
4525-18
Loading Media