Datasheet

User Guide 33
■ Position 2
■ Dual
Refer to the diagrams on page 34 for the stapling locations,
depending on the orientation you choose.
8. Click the OK button to save the properties.
9. Send the job to the printer.
At the printer:
If your printer driver doesn’t include stapling, you can select stapling
from the printer’s control panel. However, all jobs sent to the printer
are then stapled.
Note
The driver setting always overrides the control panel setting.
1. On the Xerox DocuPrint N4525 control panel, select stapling:
a. Press the Menu keys (labeled 1 or 5) to scroll to the System
Menu.
b. Press the Item keys (labeled 2 or 6) to scroll to Staple Mode.
c. Press the Value keys (labeled 3 or 7) to scroll to the desired
default stapling position — Position 1, Position 2, or Dual.
d. Press the Enter key (labeled 4).
e. Exit the menus by pressing the On Line key (labeled 0).
Output