Datasheet

User Guide 45
Printing Jobs
When you print a job, you can use the print driver to select the
following features:
■ Paper source
■ Paper size and media to use; see page 46 for special paper,
see page 48 for envelopes, see page 51 for labels, and see page
53 for transparencies
■ Orientation
■ Number of copies
■ Output bin
■ Collating
Note
You can set up a tray sequence, where the printer searches
for the requested paper in the Multi-sheet Bypass Feeder and
trays; refer to the Advanced Features and Troubleshooting
Manual on your printer CD-ROM.
The print driver may also contain the following options:
■ Draft mode, which reduces toner consumption by two-thirds
(intended for occasional proof printing of high-density
documents)
■ Single or double-sided printing (if you have the optional
Duplex Module); see page 55
■ Stapling (if you have the optional Finisher);
see page 31
■ Hole punching (if you have the optional Finisher with hole
puncher); see page 40
■ Secure printing and proof printing (if your printer has the
optional hard drive); see page 59
■ Cover sheets using different stock than the rest of the
document; see page 46
Printing Jobs