Datasheet

User Guide 51
■ Keep unused envelopes in their packaging to avoid the
effects of moisture and dryness, which can affect print
quality and cause wrinkling.
■ Only print single-sided.
■ Don’t load envelopes above the indicated mark in the
Multi-sheet Bypass Feeder or the Envelope Feeder.
■ Envelopes cannot be output to the Finisher.
Printing labels
You can print labels from the trays or the Multi-sheet Bypass Feeder.
At the printer:
1. Insert the label sheets into the trays or the Multi-sheet Bypass
Feeder in the following manner:
■ Side to be printed is face-up in trays, face-down in the
Multi-sheet Bypass Feeder.
■ The long edge of the sheet enters the printer first.
■ Don’t load labels above the indicated mark on the back of the
tray or side of the Multi-sheet Bypass Feeder.
2. If you changed the type of media in a tray or the Multi-sheet
Bypass Feeder, use the control panel to select the media type and
size.
■ For Tray 2, 3, or the Custom Paper Tray, see page 19
■ For Tray 4, see page 22
■ For the Multi-sheet Bypass Feeder, see page 27
(Trays 2, 3, or 4 have paper-size sensors, so you don’t need to
specify the paper size.)
For the Windows 95/Windows 98 operating system:
1. Create a document with text located in the correct areas. Refer to
the instructions included with the labels for margin settings.
2. In your application, select File and then Print.
Printing Jobs