Datasheet

User Guide 53
8. Click the OK button to save the properties.
9. Send the job to the printer.
Guidelines for printing on labels:
■ Use Xerox labels; refer to page 8 for information.
■ If any of the labels on a sheet are missing, do not use that
sheet; it may damage printer components.
■ Labels cannot be output to the Finisher.
Printing transparencies
You can print transparencies from the trays or the Multi-sheet Bypass
Feeder.
At the printer:
1. Insert the transparencies into a tray or the Multi-sheet Bypass
Feeder (see page 26):
■ Rough side is up.
■ Smooth side is down.
■ The stripe enters the printer first.
■ Don’t load transparencies above the indicated mark on the
back of the tray or side of the Multi-sheet Bypass Feeder.
2. If you changed the type of media in a tray or the Multi-sheet
Bypass Feeder, use the control panel to select the media type and
size:
■ For Tray 1, 2, 3, or the Custom Paper Tray, see page 19
■ For the Multi-sheet Bypass Feeder, see page 27
(Trays 1, 2, 3, 4, and 5 have paper size sensors, so you don’t need
to specify the paper size.)
Printing Jobs