Datasheet

56 DocuPrint N4525 Network Laser Printer
6. Click the OK button to save the properties.
7. Send the job to the printer.
For the Windows 2000 and Windows NT (PS/PCL5e) operating systems:
1. In your application, select File and then Print.
2. Select the Xerox N4525 printer driver.
3. Open the Properties dialog box.
4. Select the Layout tab.
5. Select either Flip on Long Edge or Flip on Short Edge.
6. Click the OK button to save the properties.
7. Send the job to the printer.
For the Windows NT (PCL6) operating system:
1. In your application, select File and then Print.
2. Select the Xerox N4525 printer driver.
3. Open the Properties dialog box.
4. Select the Page Setup tab.
5. Under Print on Both Sides (Duplex Printing), select the type of
duplexing:
■ Long edge
■ Short edge
You must have configured the printer (on the System
Configuration tab of the printer’s default properties) to include
the Duplex Module.
6. Click the OK button to save the properties.
7. Send the job to the printer.
Printing Jobs