Datasheet

66 DocuPrint N4525 Network Laser Printer
Paper size/type mismatch
This occurs when the paper size or type requested for a job is not
available in the printer so the printer goes off line. One of the
following may have occurred:
■ A tray configured for the requested paper is out of paper.
■ None of the trays is configured for the requested paper.
The control panel prompts you to load paper in the configured tray (or
the first tray in the tray sequence). Once the paper is loaded, the
printer automatically comes on line and continues printing.
If you want to load the requested paper in another tray:
1. Load the requested paper.
2. Use the Tray menu to reconfigure that tray. Refer to page 19
(Tray 1, Tray 2, Tray 3, or Custom Tray), page 22 (Tray 4 or 5), or
page 27 (Multi-sheet Bypass Feeder).
If you want to use an alternate paper:
1. Press the Value keys (labeled 3 or 7) to see each tray
configuration.
2. When you see the tray you want to use, press the Enter key
(labeled 4).
The printer automatically comes on line and continues printing
with the alternate paper.
Troubleshooting print quality
If you notice a problem with the quality of your prints, you may need
to replace one of the supplies, such as the laser print cartridge.
To diagnose the problem, check these items:
■ Check the control panel for messages on replacing supplies.
Troubleshooting