User's Manual

Other
Subtopic CQ# Description and Recommended Action
Booklet Layout 28048 You will not be able to use Booklet Layout with an Encrypted or Password
Protected PDF using the print driver. To workaround this, send the PDF
directly to DocuSP using one of the web submission tools or LPR and hold
it. At DocuSP, program the Booklet Layout option and release the job. The
job will print in booklet form.
Job submission
with PCL drivers
26157 If you are unable to submit a job from Acrobat Reader using the PCL
drivers, either send the job with the PostScript drivers or use the WebUI or
FFPM.
Landscape
duplex options
reversed
12945 When printing a landscape document using the PCL driver, select the
opposite duplexing option than the one you want. "2 Sided Print" and "2
Sided Print, Flip on Short Edge" are reversed. This also breaks booklet
layout for landscape jobs. So to print a booklet using a landscape job, send
the job to DocuSP and hold it. Program the Booklet Layout in the job
properties and release it.
Nuvera drivers
and XCAP import
22464 Nuvera drivers do not have the XCAP import capability. The drivers must be
manually configured using the driver properties.
PCL job classified
as ineligible
10164
Any PCL job may be classified as ineligible if: Resource-Based Scheduling
is enabled, and the job requests a non-default paper size (e.g. legal) and
the printer default media (e.g. letter) is not loaded. This is due to the fact
that the scheduler cannot determine the paper sizes in the driver's Page
Description Language (PDL) so it applies the queue default when
scheduling the job. Several possible workarounds include: manually
releasing the job; turning off RBS (select FIFO instead); printing using a
PostScript driver; or loading the default media in the printer.
Similarly, any PCL job may be classified as ineligible if: Resource-Based
Scheduling is enabled, and the job requests a non-default paper size (e.g.
legal) and color (e.g. blue). This is again due to the fact that the scheduler
cannot determine the paper sizes in the PDL so it applies the queue default
when scheduling the job. In this case, the scheduler would be looking for
blue letter paper, instead of blue legal paper. Workarounds include:
manually releasing the job, turning off RBS, or printing using a PostScript
driver.
Print drivers and
stapling positions
27628
When printing landscape images onto short edge feed paper, using the
following stapling or hole punch positions with the associated driver, you will
need to use the Rotate 180 option to get the staple/hole punches in the
expected location.
PS Driver - Top Left
PCL Driver - Top Right - Bottom Right - Bottom Left - 2 Staples Right - 2
Staples Left – Hole Punch Right – Hole Punch Left
Printing from
CorelDRAW with
PCL driver
26169 When printing a 2 sided, odd number of pages, job from CorelDRAW, using
the PCL driver, there may be an extra blank image (page) added to the end.
This blank image will "print" on the backside of the last page unless there is
special pages programming. If the job requires special pages
programming, use the Pages to Print option and select "1 - Number of
Pages" for the range to get the job to print without the extra blank page at
the end.
Time to print a
PDF
26095 Printing a PDF from Adobe Reader, using the Windows 2000 PS drivers,
may take a while to send. If the time it takes to submit the job is too long,
submit the PDF directly using the WebUI or FFPM.
29