User's Manual

turned off by selecting Improve Initial Pages Registration within Set in the Stacker Limits

dialog.

Note: With 7.0 SW, the “Improve Set Registration” and the “Improve Initial Pages

Registration within Set” are controlled independently. Prior to 7.0 SW, checking the “Improve

Set Registration” internally set the system into “Improve Initial Pages Registration Within Set”.

Fig. 1 – Stacker Limits dialog, accessible via the Printer Manager pathway on the Stacking tab

Using All the Adjustments Affecting the BFM

Note: Perform the actions / adjustments in the order in which they appear in this table.

Action/Adjustment When to Adjust When to change

Stacking limit

(in Printer Manager: Stacking

tab, right click on a Finisher)

• To create more convenient

stacks for unloading

• To compensate for curl build

up on large stacks

• As needed per job and

operator requirements

Automatic Image

Permanence for All Stock

Weights

(in User Diagnostics: System

Optimizations)

• Use as default to achieve

optimum fuse fix and minimum

curl in output

• Turn off to achieve

maximum output

productivity when running

mixed weight papers.

Print Engine Decurler

Adjustment

(Manual dial inside the right

front door of the Print Engine)

Start with a value of 2.

• As decurler wears,

increase this number one

notch at a time.