User's Manual

BFM Front door and covers operations:
The 5 areas on the Purge BFM include:
1. The top left cover (swings up to left for jam clearance). Area 1 is located here.
2. The top right cover (swings up to right for jam clearance). Areas 2a and 2b are located here.
3. The top main cover (swings up from front to back for jam clearance). Area 3 is located here.
4. The front door is used for unloading paper.
5. The staple door is used to replace staples and clearing any staple problems.
The 7 areas on the Bypass BFM include:
1. The top left cover (swings up to left for jam clearance). Area 1 is located here.
2. The Bypass Top Cover (Lifts from the handle on top). Area 4 is located here.
3. The Bypass Main Cover (Lifts from a handle in front. Button pushes like a car door to open).
Areas 2a and 2b are located here.
4. The Top Main Cover (swings up from front to back for jam clearance). Area 3 is located here.
5. The front door is used for unloading paper.
6. The staple door is used to replace staples and clearing any staple problems.
7. The IM Module front door (opens from the right and pulls forward). Areas 5a and 5b are
located here.
Opening the front door can be accomplished in 2 ways:
1. Push the Unload button on the front door.
While the machine is running:
- The LED will change state from on to off for the duration of the button press.
- When the set is complete, the machine will cycle down, lower the stacker and
unlock the front door.
- The LED will blink when the door is ready to open.
While the machine is cycled down:
- The LED will change state from off to on for the duration of the button press.
- The stacker will lower and the door will unlock.
- The LED will blink when the door is ready to open.
2. Using the UI.
Choose Unload button (top right on UI)
If multiple BFMs are present, select the BFM to unload.
While the machine is running:
38