User Guide

DOCUSP 3.73
XEROX DOCUMENT SERVICES PLATFORM SERIES 2-3
GETTING STARTED
¨ Jobs may be forwarded to non-DocuSP based printers as
long as the non-DocuSP printer can be accessed from the
DocuSP and entered into the Job Forwarding window.
Layout (Imposition)
¨ Overall layout and functionality of the Layout feature has
been improved. The most common multiple up options have
been added as standard templates with automatic scaling,
and do not require manual entry of a scaling percentage.
¨ The imposition templates have been simplified. Customers
should proof imposition jobs with the new layouts prior to
production.
¨ A new imposition template is available that streamlines
multiple up postcard printing. The template provides easier
printing of a single sheet, 2-sided postcard layout. This
template was introduced in DocuSP 3.61.16 as the custom
template.
¨ The Layout feature now has the ability to turn the crop or cut
marks on or off. The default setting is for the crop marks to
be off.
¨ The Layout feature now has the ability to make small image
shifts that account for the paper thickness in Signature
booklets. The Signature Shift feature provides a small creep
outward as the paper stack expands. The Signature Shift is
a checkbox and is either on or off. The default setting is for
Signature Shift to be off.
Job Preview (PostScript and PDF jobs)
¨ The ability to preview any PostScript or PDF job is available
with this release as a licensable feature. The operator may
select a job and preview a 72 dpi image of a job or page.
¨ Preview is available in Job Manager on PostScript and PDF
jobs with nearly every status, provided the job is fully
spooled on the DocuSP controller. Completed jobs may
also be previewed as long as the system is set to Retain the
last 50 jobs.
¨ Operators can also preview saved PostScript and PDF jobs
using Reprint Manager and using the DocuSP Remote
Workflow software. However, jobs previewed using Remote
Workflow are displayed very slowly due to image transfer
and processing. For best results, preview jobs that contain
all elements of the job, such as images and forms, within the
PDL.
¨ The page size is displayed in the lower left corner and can
be used to assist in job setup.