User Guide

DOCUSP 3.73
3-2 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat Applicable printer product
During an upgrade from DocuSP 3.6 to 3.7,
the following are deleted:
¨ Jobs held in Active/Completed status.
Save any important jobs as Reprint jobs
prior to the upgrade. This also
guarantees the color settings on the jobs
are locked at the 3.6 settings.
¨ User defined ICC profiles. Manually save
any user defined ICC profiles to a location
other than the DocuSP controller.
¨ Custom stock profiles. After the upgrade,
recreate any custom stock profiles.
In addition, some queue setting may change.
After the upgrade, review the queue settings
to ensure that they are correct. For example,
check the Save settings, default stock
settings, default color settings, and layout.
DocuColor 2045/2060/6060
DocuColor iGen3
The SWOP emulation output options are not
working for selected output emulations. For
example, incoming data created as SWOP
CMYK prints correctly but native CMYK
cannot be output as SWOP CMYK.
DocuColor 2045/2060/6060
DocuColor iGen3
After completing a calibration, the calibration
must be applied to a stock group.
DocuColor 2045/2060/6060
DocuColor iGen3
Do not add an ICC profile while a large job is
printing.
DocuColor 2045/2060/6060
DocuColor iGen3
When a TRC is deleted, any queues using the
TRC are set to a TRC of None and Override is
set. If a TRC is deleted, ensure that the
queues using the TRC are set to a new TRC
and the jobs using the queue print correctly.
DocuColor 2045/2060/6060
DocuColor iGen3
The LCDS Sizing feature is not honored
correctly on the DocuSP.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
When using the Socket Gateway to submit
LCDS jobs, the jobs may contain missing
pages or data, extra pages or data, the job
may abort, or a C03-308 error may occur.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If a custom paper size is programmed in the
Queue Manager to be Short Edge feed, LCDS
jobs raise a message “Edge marking values
are out of range”. If necessary, program the
custom paper size as a Long Edge Feed.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
The Reposition Output display only shows the
end of the job and does not show the end of
the set.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
Certain DJDE jobs print with shifted text. DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS