User Guide

DOCUSP 3.73
XEROX DOCUMENT SERVICES PLATFORM SERIES 3-3
GETTING STARTED
Caveat Applicable printer product
If the RIP is paused while jobs are being
ripped and the Job Properties window is
closed, the Pages Ripped and Bytes Ripped
values are cleared from the display.
Restarting the RIP causes the Pages and
Bytes Ripped display to resume correctly.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A “Write Error” message is displayed if
Eject/Unload is selected in Peripheral
Manager for a tape device that does not
contain a tape.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
Reposition output does not work for uncollated
jobs.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A large number (e.g. 100+) of jobs submitted
with the printer paused causes the printer to
cycle down intermittently after the printer
resumes printing. Single page printing
performance is very slow. Do not submit a
large number of single page jobs while the
printer is paused.
DocuTech/DocuPrint 90
The XJDC compiler displays messages that
conflict with the operation of the printer when
the STAPLE=YES command is given for a job.
On a DP 75/90, STAPLE=YES only allows 1
to N and Face down (NTO1=NO,
FACEUP=NO) printing.
DocuTech/DocuPrint 75/90
A job requiring an unsupported paper size
completes with errors but does not report the
reason for the errors.
DocuTech/DocuPrint 75/90
Do not attempt to program a paper tray that
contains ordered stock and is currently being
used by a printing job.
DocuTech/DocuPrint 75/90
After a restart of the DocuSP software, the
Queue Manager, Printer Manager,
Administration, Job Manager, and Reprint
Manager windows may take up to 5 minutes to
come up. As a workaround, exit power saver
mode before restarting the system, or power
on power off the printer during the restart.
DocuTech/DocuPrint 75/90
The system may display an unclearable Reset
message. The system prints normally.
DocuTech/DocuPrint 75/90
When Offset stacking is enabled, stitched jobs
do not offset.
DocuTech 61xx