Copier User Guide

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 2-11

Product Overview

Stand-by Mode

Prior to entering Low Power or Power Save (Auto Off/Sleep),

the machine is in Stand-by Mode whenever it is not copying,

faxing, scanning or printing a job. The touch screen is visible

and ready to be programmed.

Low Power Mode

As delivered, the machine automatically switches into Low

Power Mode 15 minutes after the last copy/print out. In this

mode, the touch screen is blank and the Power Save Indicator

light is on.

The machine is re-activated if the touch screen or any button

on the control panel is touched, the document feeder is loaded,

a paper tray opened, a job is submitted to the print queue (fax

receive or network print), or a fax or print job arrives in the print

queue. The machine responds within one second and all the

features are available within 30 seconds.

The factory default setting of 15 minutes is customer

changeable within the range of 5 to 240 minutes. For more

information refer to “Changing the Default Time Settings” on

page 2-12.

Power Save Mode (Auto Off/Sleep)

As delivered, the machine automatically switches into Power

Save (Auto Off/Sleep) Mode, 60 minutes after the last copy/

print out. In this mode the copier version of the DC 426/420

switches the Power ON/OFF switch to the off position. Any

stored jobs remain in the memory and the DC 426/420 returns

to an operational condition when powered ON.

In Power Save (Auto Off/Sleep) Mode on the copier/printer/fax

version of the DC 426/420 and all DC 440/432/430/425

configurations, the touch screen is blank and the Power Save

light is lit. The machine is re-activated if the touch screen or any

button on the control panel is touched, the document feeder is

loaded, a paper tray opened, a job is submitted to the print