User's Manual

701P41358
February 2004
XPPS 3.7.5x
12
Software Problem Action Request (SPAR) solutions
Solutions for the following reported software problems have been scheduled to be included in this release.
SPAR
Number(s)
Description
194904588 The shading and box edges are different, much coarser, than in the previous versions.
731151949 The error message "the maximum # of stocks has been reached" is displayed when XDS
is launched and the user tries to choose 17x11 stock under the main paper stock despite
the fact that the job only requires one stock.
972819889 In the DocuTech 135 Postscript driver for Windows 9x, the Xerox Job Ticket Main Paper
Stock pull-down does not show the previously selected Main Paper Stock.
314360438 Submitting a job from MS Word using 17x14 stock with the Xerox DocuTech driver prints
incorrectly.
337571120 The selectable range for paper weight is close to the DocuPrint 4635 NPS paper
specifications of 16 to 110 pound but it should be 60 to 200 for gsm.
This software release was tested to specifically resolve the SPARs noted. This software may resolve a
reported problem that may resemble one of the listed SPARs. Should this software fail to resolve a
reported problem, contact your Xerox customer representative with a detailed job scenario and sample
job(s) for further investigation, testing, and resolution.