User's Manual

701P41358
February 2004
XPPS 3.7.5x
3
Important Information:
??The following software, which was previously available as part of the Xerox Production Print Services
releases, is no longer available.
??Xerox Windows 9x/ME PCL5e printer drivers
??Xerox Windows NT 4.0 PCL5e printer drivers
Due to this change, the installation instructions included in the Installation and configuration guide are
no longer valid. An additional document is included in this kit that contains updated instructions for
installing the following elements off the enclosed CDROM:
??Xerox Document Submission (XDS)
??Xerox customized PostScript printer drivers for Windows 9x, ME, and NT4.0
??Xerox customized PostScript and PCL printer drivers for Windows 2000 and XP
??Job submission using lpr with the XDS command line client is no longer supported.
??DocuSP 3.8 supports printing PCL XL class 2.1 for color and PCL XL class 2.0 for the black and white
printing products. XPPS 3.7.5x does not provide a PCL XL (PCL6) Xerox custom printer driver. In order
to take advantage of the PCL XL features, a native HP PCL XL driver will have to be used. Ensure the
driver chosen supports the same class of PCL as the DocuSP.
??Even with an HP PCL XL driver that supports the same class of PCL as the DocuSP, some minor
compatibility issues may be seen due to commands within the PCL that are not supported on the
DocuSP controller. Contact your Xerox customer support representative for assistance if
necessary.
??Native HP PCL drivers do not support all of the features of the DocuSP-based printer. Any printer
specific features can be programmed at the DocuSP controller after the job has been submitted.
??DocuSP 3.8 still supports printing PCL 5e and the Xerox custom PCL 5e drivers are still available for
use.
??In order to print to a DocuSP 2.X printer from Windows NT/2000/XP with the Xerox custom PCL 5e or
PS drivers, the user must:
1. Select Start -> Settings -> Printers
2. Select the 3.7.5x Xerox Printer Driver being utilized
3. Right Click and Select Properties...
4. Select the Device Settings Tab
5. Change "Send DocuSP 2.X compatible Job Ticket" to Yes, conversely setting "Send DocuSP
2.X compatible Job Ticket" to No does generate an XPIF (DocuSP 3.X) job ticket in the front of
the job, and is also the default setting.
??In order to generate PS without a Xerox Job ticket, the user must:
1. Select Start -> Settings -> Printers
2. Select the 3.7.5x Xerox PS Printer Driver being utilized
3. Right Click and Select Document Defaults...
4. Select the Advanced Tab
5. Change "Send Xerox Job Ticket" to No, conversely setting "Send Xerox Job Ticket" to Yes does